Esser Fire Systems | Esser Management System | Esser Voice Alarms | Esser Loudspeakers | Gent Analoque Addressable | Gent Detection & Alarm Devices | Gent Interfaces | Gent Text & Graphic Software |
ESSER » Fire Systems » Automatic Detectors » Series IQ8Quad (Intelligent Addressable) » Detector with Integrated Alarm Devices » O2T/So multisensor fire detector IQ8Quad with isolator

O2T/So multisensor fire detector IQ8Quad with isolator

In addition to smoke detection with the conventional O²T multisensor technology, the detector is provided with a built-in alarm signaling device.

Detection

Multisensor detectors with two built-in optical smoke sensors with different scattered light angles as well as additional heat detector sensor evaluation for detecting everything from smouldering fires to open fires with consistent response performance. Smoke sensor signal identification to ensure smoke classification and reduction of false alarms caused, for instance, by water vapour or dust. Each detector is provided with an integrated isolator.

Alarm signaling

The alarm signaling device is activated by the control panel. No further short address needs to be allocated. It is programmed with tools 8000 as of software version 1.05.

Alarm tone / speech message programming (depending on type)

For detectors with speech message and / or alarm tone function with up to five language options, up to 4 signals can be programmed. Two signals are reserved for alarm signaling and evacuation in the case of fire. Two further signals can be programmed for other events. Each signal can consist of up to four signal components, enabling one signal to be programmed as a DIN tone combined with subsequent speech messages in three different languages.

Alarm tones can be chosen from a table with various tone types. For application in schools, a break signal to signify the breaks between class can be activated.

When the basic setting is selected, signals / signal components can be continuously repeated until the signaling function is interrupted by the control panel. They can also be programmed with a repetition rate of one to three times. Thus, the break signal in schools can be deliberately set to only one repetition. In the same way, the total signal can be set to continuous repetition, with the DIN tone being played only once while subsequent speech messages are played up to three times.

Sound pressure programming

The sound level [dB(A)] can be set to eight levels, from approximately 64dB (A) to approximately 92dB (A).

 

Part No.   :   802384


Features

Detection

The reliable O²T multisensor principle for consistent response performance at the highest level of security against false alarms

Individual control of the sounder

Sounder

Loop powered - no need for external power supply

No additional short address

Automatic synchronization of various IQ8Quad alarm signaling devices

Maximum sound level: 92 dB (A) at 1 m

Maximum sound pressure can be set

Multiple signal components can be combined to one signal template

Signal template and repetition rates can be set

Up to 26 different languages are available

20 different signal tones, incl. DIN-tone

Low power consumption

Technical Data

Operating voltage 8 ... 42 V DC
Quiescent current @ 19 V DC approx. 80 μA
Quiescent current @ FACP battery approx. 450 μA @ 42 V
Sound level max. 92 dB (A), +/- 2 db (A) @ 1m for DIN tone
Area to be monitored max. 110 m²
Height to be monitored max. 12 m
Air velocity 0 ... 25.4 m/s
Application temperature -20 °C ... 65 °C
Storage temperature -25 °C ... 75 °C
Type of protection  IP43 (with base + options)
Material  ABS
Air humidity < 95 % (non condensing)
Color white, similar to RAL 9010
Weight approx. 145 g
Detector specification EN 54-7/-5 B/-17, CEA 4021
Specification  EN 54-3 acoustic signaling device
Dimensions Ø: 117 mm H: 59 mm
  Ø: 117 mm H: 67 mm (incl. base)

Accessories

There is no accessories at the moment.
HOME | ABOUT | PRODUCT | CONTACT
     
Copyright © 2017 Safe Controls Sdn Bhd. All Rights Reserved. Developed by Lagenz.
Esser Fire Systems | Esser Management System | Esser Voice Alarms | Esser Loudspeakers | Gent Analoque Addressable | Gent Detection & Alarm Devices | Gent Interfaces | Gent Text & Graphic Software |